Service Entrance Concentric Cable

Application

Type SE, service entrance cable is primarily used to convey power from the service drop to the meter base and from the meter base to the distribution panelboard; however, the cable may be used in all applications where Type SE cable is permitted. SER may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating is 600 volts.

Split Concentric Service entrance cable is primarily used to convey power from the Aerial Bundled Cable to the meter base and from the meter base to the distribution panelboard, should be suitable for laying in cable ducts and in air. 

Construction

Type SE, service entrance cable is constructed with sunlight resistant Type XHHW-2 conductors or Type THHN/THWN/THWN-2 conductors. Annealed (soft) copper Conductor. AA-8000 series aluminum alloy Conductor.Copper clad aluminum Conductor. Compact stranded. Cable assembly plus reinforcement tape and Jacket are jacketed with sunlight resistant gray polyvinyl chloride (PVC). Style SEU cable has two phase conductors surrounded by a concentric neutral while the SER style has two, three or four phase conductors and a bare neutral.

Split Concentric Service entrance cable is constructed with Annealed (soft) copper Conductor. Aluminium 1350 Conductor, AA-8000 series aluminum alloy Conductor.Copper clad aluminum Conductor. Compact stranded with PVC/XLPE insulation and PVC/PE/XLPE overall sheath.